Well pump size by depth / 140 ft
Well pump size with water 140 feet down
With the pumping water level 140 feet below the wellhead, the pump lifts 140 feet and then pushes up to the switch's cut-out pressure: 279 feet of head at 40/60 psi, 256 at 30/50, before pipe friction. In Goulds' 10GS series the smallest motor that meets a 7 gpm one-bathroom demand at 40/60 is ¾ hp; at 30/50 it is ¾ hp.
From 140 feet down the ½ hp models are out of the chart at 40 psi, and the ¾ hp 10GS07 gives 10.8 gpm at 40 psi but only 7 at 60.
This is the depth where the 1½ hp 10GS15 enters the chart, and it is the smallest pump here that meets a two-bathroom 14 gpm demand.
Which 10GS model meets each household demand
| Bathrooms | Pump flow needed | At 30/50 psi | At 40/60 psi |
|---|---|---|---|
| 1 | 7 gpm | 10GS07, ¾ hp (12 gpm at 30 psi) | 10GS07, ¾ hp (12 gpm at 40 psi) |
| 1½ | 10 gpm | 10GS07, ¾ hp (12 gpm at 30 psi) | 10GS07, ¾ hp (12 gpm at 40 psi) |
| 2–2½ | 14 gpm | 10GS07, ¾ hp (12 gpm at 30 psi) | 10GS07, ¾ hp (12 gpm at 40 psi) |
| 3–4 | 17 gpm | 10GS07, ¾ hp (12 gpm at 30 psi) | 10GS07, ¾ hp (12 gpm at 40 psi) |
Smallest model that delivers the flow at the cut-in pressure and is still rated at the cut-out pressure, read at the 220 ft column. Demand: Goulds peak-demand table. Pipe friction and any rise to the tank add to the depth — use the calculator for your pipe run.
The chart at 140 feet
Rated gallons per minute for each model at this depth, by the pressure rows of Goulds' chart (labelled PSI). A dash means the model is not rated there — either it cannot lift that far against that pressure, or the depth is shallower than its recommended range.
| Model | HP | 0 psi | 20 psi | 30 psi | 40 psi | 50 psi | 60 psi |
|---|---|---|---|---|---|---|---|
| 10GS05R | ½ | 6.5 | — | — | — | — | — |
| 10GS05 | ½ | 12.8 | 8.3 | 4 | — | — | — |
| 10GS07 | ¾ | 15.2 | 13 | 12 | 10.8 | 9.4 | 7 |
| 10GS10 | 1 | — | 14.9 | 14.2 | 13.2 | 12.3 | 11 |
| 10GS15 | 1½ | — | — | — | 15.8 | 15.4 | 14.8 |
| 10GS20 | 2 | — | — | — | — | — | 16 |
| 10GS30 | 3 | — | — | — | — | — | 16 |
Ratings: Goulds Water Technology, Model GS 5–25 GPM technical brochure B5-25GS (March 2012) — copy hosted by a retailer; the current Xylem brochure has no ratings tables — "Depth to Water in Feet/Ratings in GPM (Gallons per Minute)". Read at the next listed depth at or below 140 ft.
Reading this for your well
- Use the pumping level, not the static level. Water drops when the pump runs; the well driller's log or a pump test gives the pumping level. If you only know the static level, the difference can be tens of feet.
- Add the rise and friction. A tank uphill of the well adds its height; 14 gpm through 200 feet of 1¼-inch plastic pipe adds 7 feet, through 1-inch pipe 26 feet.
- Check the well's yield. A pump larger than the well can supply will draw it down. New York's health department suggests a well yield of at least 5 gpm for a home; a pressure or storage tank covers peaks above that.
- Match the tank. A 14 gpm pump on 40/60 needs about 54.3 gallons of pressure tank for a one-minute run — see 14 gpm tanks.